Samsung GT-i9300 S3 Warning! Camera Failed Done
Samsung GT-i9300 S3 Camera Solution
Samsung GT-i9300 S3 Camera Failed Solution
Samsung i9300 Camera Failed Solution
Status


1st Procedure
Manual Factory Reset
*2767*3855#

Hard Reset

But no lock
(

2nd Procedure
My Tools
Drivers
Odin 3.07
File GT-i9300 s3 V4.0.4
1. Install USB drivers
2. Download ODIN v3.07
3. Download File
4. Turn off the unit and boot into download mode.

5. Connect phone, open ODIN
6. In ODIN check auto reboot and F. Reset Time.
7. Click "PDA" then navigate to and select the File

8. Click "Start"

Logs
Status
1st Procedure
Manual Factory Reset
*2767*3855#

Hard Reset

But no lock


2nd Procedure
My Tools
Drivers
Odin 3.07
File GT-i9300 s3 V4.0.4
1. Install USB drivers
2. Download ODIN v3.07
3. Download File
4. Turn off the unit and boot into download mode.

5. Connect phone, open ODIN
6. In ODIN check auto reboot and F. Reset Time.
7. Click "PDA" then navigate to and select the File

8. Click "Start"

Logs
Code:
<OSM> Enter CS for MD5.. <OSM> Check MD5.. Do not unplug the cable.. <OSM> Please wait.. <OSM> I9300XXALE9_I9300OJVALE9_I9300XXLE8_HOME.tar.md5 is valid. <OSM> Checking MD5 finished Sucessfully.. <OSM> Leave CS.. <ID:0/008> Added!! <ID:0/008> Odin v.3 engine (ID:8).. <ID:0/008> File analysis.. <ID:0/008> SetupConnection.. <ID:0/008> Initialzation.. <ID:0/008> Get PIT for mapping.. <ID:0/008> Firmware update start.. <ID:0/008> boot.img <ID:0/008> NAND Write Start!! <ID:0/008> cache.img <ID:0/008> hidden.img <ID:0/008> modem.bin <ID:0/008> recovery.img <ID:0/008> system.img <ID:0/008> RQT_CLOSE !! <ID:0/008> RES OK !! <ID:0/008> Removed!!
My Finish Product

Post a Comment
Click to see the code!
To insert emoticon you must added at least one space before the code.